Description EchoPod DL10, a general purpose non-contact ultrasonic level transmitter for small tanks 49.2" (1.25 m) or less. EchoPod enables flexible design applications for system integration or retrofit of floats, conductance and pressure sensors. Well suited for fluid handling and chemical feed applications intrgrating process or control automation of small tanks mounted on tools, skids or machines. The rugged PVDF enclosure is well suited for a wide range of corrosive, waste, or slurry type media, and can be broadly selected for atmospheric day tank, process vessel or dispenser, pump lift station and waste dump applications. Level indication can be monitored via a local display or controlled through a PLC. Advantages · Provides two-wire 4-20 mA analog output · Replacement of multi-point float, conductivity and pressure level switches · WebCal, an innovative PC user interface that provides fast and accurate configuration · Compact sensor with 2" dead band and beam width optimized for small tank applications 49.2" (1.25 m) or less Technical Specifications Range: 49.2" (1.25m) Accuracy: 0.125" (3mm) Resolution: 0.019" (0.5mm) Beam Width: 2" (5cm) Dead band: 2" (5cm) Supply voltage: 24 VDC (loop) Loop resistance: 400ΩO max Consumption: 0.5W Signal output: 4-20mA, two-wire (when loop powered) Contact type: (4) SPST relays 1A Loop fail-safety: 4 mA, 20 mA, 21 mA, 22 mA or hold last Relay fail-safety: Power loss: Hold last Power on: Open, close or hold last Hysteresis: Selectable Configuration: WebCal® (PC Windows®) USB 2.0 Temp. comp.: Automatic over range Process temp.: F: 20° to 140° C:-35° to 60° Ambient temp.: F: -31° to 140° C: -7° to 60° Pressure: MWP = 30 PSI Enclosure: Type 6P, encapsulated, corrosion resistant & submersible Encl. material: PC/ABS FR Strain relief mat.: Santoprene Trans. material: PVDF Cable length: 48" (1.2m) Cable jacket mat.: Polyurethane Process mount: 1" NPT (1" G) Mount. gasket: Viton® Classification: General purpose Approval: cFMus, CE Compliance: RoHS